Water Cooling System
Air cooling part: working fluid (soft water or other liquid) circulates in the coil of closed cooling tower. After the heat of fluid is absorbed by the pipe wall of coil, the heat of pipe wall is discharged out of the machine through the fan on the top.
Air Cooling Part
Working fluid (soft water or other liquid) circulates in the coil of closed cooling tower. After the heat of fluid is absorbed by the pipe wall of coil, the heat of pipe wall is discharged out of the machine through the fan on the top.
When the fluid temperature is too high (beyond the set temperature), the spray system will be automatically started. The spray pump will spray water on the hot and humid pipe wall and form a water film, which will absorb a lot of heat (latent heat of evaporation) through evaporation.Some of the spray water turns into steam, which is carried away by the moving air, and the unevaporated water drops into the collecting tank for the next cycle.The fluid in the coil circulates in a closed loop and theoretically there is no consumption.Spray water consumption is only 0.1-0.2% of the unit flow.
Fully enclosed circulation cooling ensures the purity of the medium and eliminates the blockage of pipes caused by sundries.
Soft water circulation cooling, no scale generation caused by the induction heating power, induction coil and other overheating damage.
Automatic digital display temperature control, energy saving.
|Model||Cooling capacityKcal/h||Fan deliverym3/h||Working water flow m3/h||Inlet and outlet pipe diametermm||Circulating tank volume L||Weight kg||Dimension L×W×H mm|
Portable Induction Heating Machine
The intelligent digital induction heating power supply has a high-speed core processor of 100 megabytes, which can calculate and process all digital s...
Air Cooling Induction Heating Machine
The signal Uses optical fiber transmission, in the transmission process, the loss of the signal is small, no error signal without distortion, enhance ...
Analog Circuit Induction Heating Machine
Power: 18-200KW Oscillating frequency: 10-80KHZ Input voltage 3 phase 380V 50/60Hz Water pressure: 0.15-0.3Mpa
Hardening Machine Tools
Model JC-Z01Model JC-S01Model JC-Z01Model JC-W01
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.